Huma-Air Replacement Tuning Regulator For The Air Arms S510 XS
This unique Huma-Air regulator for the Air Arms S510 XS is specially designed as a “one on one” replacement regulator for the S5 XS rifles and solves all your original regulator issues instantly!
The regulator is very consistent over the total pressure range of the buddy bottle and it can be replaced into the action within a minute as a one on one swap.
The regulator is vented to the atmosphere, so no creeping up in power in long term.
Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and high power Xtra FAC models.
Fitting is very easy; just depresurize your rifle and unscrew the pressuretube. Then the factory regulator can just be pulled out of it’s socket and the Huma-Air can be pushed in and you are ready
The benefits of the Huma-Air tuning regulator for the Air Arms S510 XS:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- It will give you a better shotcount and a full flat shotstring immediately.
- The pressure scale will give you the posibilty to adjust the output pressure of the Air Arms S510 XS regulator very easy
When you order your Air Arms S510 XS Tuning Regulator you will receive:
- Your regulator preset on to your own wishes;
- A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
- We will include a “Huma-Air regulated” breech sticker;
Pressure settings of the Air Arms regulator
The regulators come in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and Xtra FAC models.
They come preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
